LoPro®Max underfloor heating
Our powerful, slim underfloor heating system that’s installed over the existing floor deck.
Why choose LoPro®Max?
LoPro®Max is a slim, high-output underfloor heating system that can be installed with minimal disruption. Designed to be laid over the top of a building’s existing concrete or insulated joisted subfloor, LoPro®Max can even be installed over different floor constructions within the same room, making it an excellent retrofit choice for extensions.
At just 22mm thick, this low profile UFH system adds minimal build-up to floor height, so there’s usually no need to increase the height of ceilings and doorways.
We design your LoPro®Max system to work with each room’s heat losses, factoring in the flow rate and temperatures needed to quickly provide the right level of warmth.
Specifications
- Low profile overlay UFH system with just 22mm height build-up
- Max heat output up to 150W/m2, thanks to outstanding thermal conductivity
- Super-fast response time that matches radiators
- Simple and quick to install. Floor coverings can be fitted after just 72 hours
- Ideal for low-temperature systems such as heat pumps
- Suitable for a wide range of different floor coverings, including Luxury Vinyl Tiles such as Amtico.
Get a bespoke quote
We would love to speak with you to discuss your project – upload your plans for a free quote.
Installing LoPro®Max
LoPro®Max has been developed specifically for easy installation into renovations.
Step 1. Prep the floor by levelling any uneven concrete, insulating below joisted floors and priming the surface ready for the panels.
Step 2. Fit the castellated panels to the primed floor by cutting them to fit, peeling off the film and sticking them down. They won’t budge – even with pumped compound.
Step 3. The pipework pushes easily between the castellations on the panels. For speedy fitting, push the pipe down with your foot as you go, following the included bespoke tube layout drawings.
Step 4. Pour the Quickset compound. Depending on the scale of your project, you may need a contractor to help with this. Our specially formulated self-levelling compound dries so fast you can walk on it in just 8 hours and lay floor coverings after 72 hours.
Not sure LoPro®Max is the one? We’ll help you find the right system.
Call us on 01404 549770 to speak to a specialist, or use the underfloor heating selector tool to explore more of our products.
We’d had two Nu-Heat systems in previous properties and their new LoPro®Max system ticked all the boxes.
Paul and Gill Regan transformed their bungalow with LoPro®Max.
LoPro®Max performance with different floor coverings
Different floor covering materials will affect the way an underfloor heating heats a room and may also be sensitive to heat.
When we design your LoPro®Max system, we’ll compensate for insulating floor coverings such as carpet and protect sensitive floor coverings like wood or vinyl.
For the highest heat output, pair LoPro®Max with highly conductive floor finishes such as natural stone and tile.
Flow temperature | ||||
Vinyl (*limit to 75W/m2) | ||||
---|---|---|---|---|
Natural stone/tiles (*limit to 100W/m2) | ||||
14mm engineered board | ||||
2 tog carpet/underlay | ||||
*We factor this into the design of your system. |