ClipTrack^® OneZone^® Screed Kit for Underfloor Heating

• Good heat output of 100W/m2
• Pack sizes available for rooms from 10-70m2
• Simple to install as part of the build schedule
• No additional height build-up – it is set within the screed floor
• Includes the same standard of high quality components that are found in a Nu‑Heat fully designed system

• Pre-assembled single-zone manifold, based on the same high quality design used for Nu-Heat fully designed systems, reduces installation time
• Pump and blending valve module, complete with isolation valves for easy pressure testing
• Pipe distributor set (4-way for systems less than 35m2, 8-way for systems 35m2 and over)
• Thermo-electric actuator
• OneZone^® wiring centre with labelled terminals for a straightforward installation
• 10mm Fastflo^® underfloor heating tube
• ClipTrack to hold the 10mm tube
• Edge isolation strip
• Individual tube staples
• Choice of a wired neoStat, or wireless, battery-powered neoAir, thermostat with the option to upgrade to smart control
• Detailed installation manuals and user instructions
• Delivery by carrier within 2 days

Choose from two market-leading control options:

Wired neoStat

Nu-Heat’s neoStats are high quality, hard-wired programmable thermostats. Features include holiday and temperature hold, soft touch operation and energy saving Optimum Start. It can also be easily upgraded to offer smart control functionality by adding the neoHub+ (please call us on 01404 549770 to upgrade).

Wireless neoAir

A popular option for renovation projects, the wireless neoAir avoids the need for chasing any wires into walls*, protecting décor. The neoAir system includes an RF switch, enabling wireless control of the boiler and pump, avoiding the need to run cabling from the wiring centre back to the boiler.

If using floor or air sensors then cabling to the thermostat will be required.

OneZone® has been designed so that installation requires no prior experience or any specialist tools and arrives pre-built, complete with everything that you will need to install it; system controls, flexible Fastflo® heating tube and a fully illustrated installation manual.

OneZone® installations typically require two full working days. However, this is dependent on the specific project and can vary.

A wide range of floor coverings can be used with our underfloor heating systems.

For optimum performance hard surfaces such as ceramic tiles, slate, stone and marble are recommended as they provide the best transfer of heat, meaning quicker response times.

Carpet, engineered timber and vinyl floor coverings, such as Amtico and Karndean, also work well with underfloor heating.

When choosing carpet, please note that the combined tog value of the carpet and underlay should not exceed 2.5 in order to maintain the efficiency of the underfloor heating.

Delivery will be made within 2 working days. The price of delivery is included in the OneZone® pack price.

Special delivery requirements, such as Next Day and Saturday delivery will be charged extra. Please contact Freephone 0800 731 1976, quoting your customer reference to arrange.